3 —————————————————————— Tree Structure 3 Tree Structure All Service tool functions are organized under the tree –structure – structure Which you can see in Figure 3-1. It is divided in a SYSTEM path ,where you have access to the main service Tool functions – STATUS (system monitoring) - TEST (event monitoring tests) and - SETUP(setup of system environment),and in a TOOLS path. The TOOLS pass contains the Service Tool functions which supports installation and maintenance of the elevator. LCB_II - Menu SYSTEM - Menu TOOLS - Menu STATUS - Menu TEST - Menu SETUP - Menu Search IO Calls Event Install Erase IO Inputs Diagnosis RSL Setup INST Outputs Part Allowed Opr.Memory Group RSL POS ICSS Selftest DCS Run
Cmd ELD 4 —————————————————————— Menu System 4 LCB_II Menu System 4.1 OVERVIEW The Menu System allows you to access the single Server Tool functions if you choose the right path through the Tree-Structure by pressing the displayed key.(number 1,2,3… 8) If there is only one number to choose .you can call the function also with the Shift Key ‘ENTER’. You can toggle between the different Menus using the ?GO ON? or ?GO BACK? key if the ?>?character indicates a hidden menu. The ?CLEAN? key lets you jump one step back. If you want to jump back to the one of the three Main Level of the architecture,(MONITOR, FUNCTION or SET) you can do it with the ?M?,?F? or ?S? Main Level Key. The LCB_II Menu System is shown in Figure 4 – 1.
Power on SELF TEST - OK - MECS - MODE M M LCB_II - Menu System=1 Tools=2 1 2 F SYSTEM – Menu > Status = 1 Test= 2 SYSTEM – Menu > Setup = 3 TOOLS – Menu > 1 = Search IO TOOLS – Menu > 2 = Erase IO TOOLS – Menu > 3 = Setup INST 1 S STATUS – Menu > Calls = 1 Input = 2 STATUS – Menu > Output = 3 Group = 4 STATUS – Menu > ICSS = 5 Cmd = 6 2 3 TOOLS – Menu > 9 = Opr.Memory TEST – Menu > Events = 1 Diag = 2 TEST – Menu > Part = 3 RSL = 4 TEST – Menu > Selft = 5 SETUP – Menu > Install =1 RSL = 2 SETUP – Menu > Allowed = 3 POS = 4 SETUP – Menu > DCS – RUN = 5 ELD=6 1 INSTALL – Menu > 01 System 2 Allowed – Menu > 01 Enable Allowed – Menu > 02 Cut Call Allowed – Menu > 03 Card_Rd
M LCB_II - Menu (15) 4.1.1 System Path 1 2 System - Menu System - Menu F (16) (61) 1 2 3 Status - Menu Test - Menu Setup - Menu S (28) (37) (37) (47) 1 Calls 1 Event Install - Menu (31) (38) 1 Input 2 Diagnosis 1 System 2 (33) (40) 3 Output 3 Part 2 OCSS (34) (42) 4 Group 4 RSL 3 Group (35) (43) ICSS Self test 4 Drive 5 (36) 5 (44) 6 Cmd 5 Doors (36a) 6 Position Ref. 7 Cargo 8 Emergency (转下页) Figure 4 – 1 :Menu System
RSL 2 (50) 3 Allowed - Menu (52) 1 Enable 2 Cut Call Legend: 3 Card Reader 1 Service Tool Key. (56) 4 POS Menu System Function (58) 5 DCS Run (16) Page Number (60) 6 ELD Figure 4 – 2:System Path Overview LCB_II - Menu M 4.1.2 Tools Path 1 2 System - Menu Tools - Menu F (61) 1 Search IO S 2 Erase Legend: 3 Setup INST 1 Service Tool Key Menu System 9 Security Function (16) Page Number Go on Test Figure 4 – 3:Tools Path Overview.
OTIS (TT)测试工具的使用方法
☆ Toec-40调试方法
[概要] 由于本工具可与若干种OTIS 公司的电梯（如：TOEC-40 TOEC-60等） 连接。本说明书仅以与TOEC-40 型电梯相连时为例，与其它电梯相连时略有不同。
测试工具接在LB（逻辑板）上，因此它可以一边登记一边检查轿厢的状况和各个输入输出。
[功能] 1.LED 检查
2.各状态的显示（轿厢状况，门状况，轿厢位置，方向，呼梯） 3.呼梯的登记 4.输入的显示 5.输出的操作
6.各轿厢的状况（组件）
7.存储器(RAM)内存内容的显示 [显示部]
显示窗：有16×2个LCD显示屏，显示出英文和数字。 [键]
[MOUDULE] 对线路板进行选择。 [DISP STATE] 显示轿厢状况，门状况。 [ENT CALL] 登记呼梯。 [TEST] 不用。 [FUNTION] 不用。 [DISP IN] 输入显示。 [SEL OUT] 输出操作。 [0] ～ [9] 呼梯登记的楼层输入。 [SET] 不用。 [ON] 使输出接通。 [UP] [DOWN] 上，下呼梯。 [蓝键] 换档键。 [OFF] 使输出断开。 [GO ON] 显示后面的输入，输出状况。 [GO BACK] 显示后面的输入，输出状况。
使用方法
1．LCD 检查（自身测试） [功能] 实验LCD的显示机能 [使用方法]
（1） 由于接通LB（逻辑板），自动开始LCD顺次点灯实验。 （2） 在使用实验工具进行的情况下，按动红色的转换开关。 2．轿厢状况，门状况的显示：
[功能] 显示轿厢状况，门状况，轿厢位置，方向，各个呼梯。 [使用方法] 按动{DISP STATE} [显示]
★★★★★★★★单台的场合★★★★★★★★
Page.2
轿厢的方向 轿厢状况 门状况
1） 轿厢方向
向上▲ 向下▼ 无方向
第一行 LCD轿厢位置 第二行LCD轿厢呼唤 第三行LCD大厅下呼唤 第四行LCD大厅上呼唤
2）轿厢状况 TRV? 继电器操作电路的交流100V电源脱落。 CORR? 校正运行开始前的等待状况，等5秒后便开始校正运行。 CALL? 等待呼梯。 RUN 轿厢正在运行。 DZ? 轿厢减速正等待门区，轿厢换速但还未进门区。 ZXT? 轿厢减速进入门区后正等待停止。 INS 轿厢正处在检修中。 ESS 紧急停止开关断开。 RESCU 正在援救运行中。 RLV 正在找平运行中。 MTC 电动机过热保护装置正在工作，马达热保护结点短路。 EQO 正在地震管制运行中。 FSO 正在消防管制运行中。 PKS 停车开关接通。 EMERG 轿厢因急停而处于减速，但未完全停止。 FAIL! 经过5次救援操作。 SAF? 安全回路断开。 MIP 丢失IP（变成最端部楼层间的MIP）
3） 门状况 DFC 轿门处在完全关闭状态。 DOL? 轿门正在开启中，但未完全开齐。 NT 轿门完全打开，正在等待门时间的结束。 DFC? 轿门正在关闭中，但未完全关齐。 DOHB 轿门完全开齐，并在计算DOS或DOHB开门时间。 ISS 轿厢处于独立服务操作。 ★ ★★★★★★★2个轿厢的情况★★★★★★★★
轿厢 轿厢状况 门状况 A▲ RUN DFC 轿厢A方向
1）轿厢
A:将测试工具和A号机接通的情况。
B：将测试工具和B号机接通的情况。 Page:3 2）其它和单机情况相同
3．呼梯的登记
[功能] 输入轿厢呼梯，大厅呼梯。 [使用方法] ★ ★★★★★★★单台的场合★★★★★★★★ 1) 按动[ENT CALL] 键
2) 按动[GO ON] 或 [GO BACK]，就选择轿厢呼梯或大厅呼梯。
HC ：大厅呼梯 CC ：轿厢呼梯
3) 按动[1] ~ [0] 的数字键，输入呼梯的楼层 ★最下楼层作为 [1] ★
★改变错误的楼层时继续按动数字键★
4）按动[UP]或者[DOWN] 键时输入上行或下行的轿厢呼梯，定上行还是下行。
★呼梯被登记时在LCD显示部LCD点亮★
[使用方法] 在B1-5F 现场输入3F的轿厢呼梯显示。 CALL? DFC [ENT CALL] CALL?HC GO ON CALL?CC
★★★★★★★★★群组的场合 其1（接通A号机）★★★★★★★★★ 1） 按动[ENT CALL] 键
2） 按动[GO ON] 或[GO BACK] 键，选择轿厢呼梯或大厅呼梯 HC：大厅呼梯 CC：轿厢呼梯
3） 呼梯登记方法和单机相同
★★★★★★★★★群组的场合 其2（接通B号机）★★★★★★★★★ 1） 按动[ENT CALL]键
2） 按动[GO ON] 或 [GO BACK]键 3） 以下与单机相同 4 输入的显示
[使用方法] 1） 按动 [MOUDULE] 键时，显示线路板的名称。 CIB 1 2) 用[GO ON] ,[GO BACK] 键检查线路板（只有带※的线路板才能显示输入）
▲ ※CIB 1 ※CIB 2 ※CIB 3 TTB1 TTB2 （GO BACK） TTB3 GO ON SGB HLB1 HLB2 ▼
HLB3 ※I I B ※MIB
L B
Page:4
3)按动[DISP IN]键时，显示这块线路板最初的输入 IIB /FST ON 线路板 输入 输入状态
4） 使用[GO ON],[GO BACK]想要检查的输入被显示出来 CIBI : CB 1 OFF
CB 2
（GO BACK）
3 4 5 6 7 8 UHB 1 2 3 4 5 6 7 8 DHB 2 3 4 5 6 7 8 EP ATS PADZ ELC ERR PWC XEPL FSS
GO ON
CIB2: CB (GO BACK) UHB DHB 线路板
9 10 11 12 13 14 15 16 9 10 11 12 13 14 15 16 9 10 11 12 13 14 15 16 输入
Page:5
GO ON
（GO BACK）
/FST /IP /DRV /URV ACS IUB IDB DOHB LRU TR1 TR2 TR3 PKS ISS ANSS LWS LNS TIU TID
由计数板来的输入 由计数板来的输入 由计数板来的输入 由计数板来的输入
GO ON
Page:6
(GO BACK)
/MTC /SDP /ZXT /OUS SVAJ FOS EQC DOB SGS /1LS /2LS PCS
GO ON
[注意]带 / 符号的输入表示在OFF时其功能起作用。
5 输出的操作
[机能] 开关 TTB , EPB , SGB的输出。 [使用方法]
1）按动[MOUDULE]键
2）用[GO ON]，[GO BACK]键，选择线路板 （参考输入显示这项） 3）按动[SEL OUT]键显示 TTB CTL 1 4）由[GO ON],[GO BACK]键，选择希望 ON ， OFF的输出。 5）用[ON],[OFF] 键时输出的ON或OFF。
线路板 TTB1 (GO BACK)
CTL UTL DTL
输出 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 2 3 4 5 6 7 8
输出的状况 ON
GO ON
线路板 输出 TTB3 CTL17 … … … … CTL24 UTL17 … … … UTL23 (GO BACK) DTL17 … … … … DTL24
SGB (GO BACK)
SG1A … … SG1G SG2A … … SG2G CBS ARS NOL INL NSL UDL DDL LWL BUZ DCG FOL EQL CFL ATBU EPL
Page:7
GO ON
GO ON
[注意] SGB，EPB的输出接通（ON）时，因为微机定期地输出位置的信号，所以指示器只能在一瞬间接通或断开。
这时，即使对于SGB，EPB的继电器的声音也能确认。 Page:8 6．轿厢状况的显示（只限于群组）
[功能] 显示被接通的那号机的轿厢状况，轿厢呼唤，大厅呼梯。 [使用方法]
1）接通A号机或者B号机 2）按动[DISP STATE] 键
3）按动[GO ON]键时，显示如下：
A号 轿厢的状况
4）A号机接通的情况下，只能动[GO ON]键时，就显示B号机的情况。 [轿厢状况的内容]
T：轿厢在恒速进行中 （TRAVELLING）
NT：轿厢在停止或减速中 （NOT TRAVELLING） E：轿厢不满员 （EMPTY）
NE：轿厢满员 (NOT IMMEDIATE) I：轿厢不延迟 （IMMEDIATE）
NI：轿厢过一段时间再开 (NOT IMMEDIATE) A：轿厢可能一组运转 (AVAILABLE)
NA：分别（独立）运转 （NOT AVAILABLE） R：轿厢可以正常运转 (READY) NR：轿厢有故障 (NOT READY) 7． 存储器内容的显示 [功能] 数据在RAM指定位置显示。（在RAM的最初部分记入发生故障的次数.） [使用方法]
1） 按动[DISP STATE]键
2） 两次按动[GO ON]键时，显示如下：
8□□□ □□ □1 F1 F1
光头位置（8000H） 8000H的数据 8001H的数据 8002H的数据 8003H的数据 3） 是先头位置向100H位置进时，按动[GO ON]键，恢复时，按[GO BACK]键。 4） 制定先头位置的下两位时，使用[1]～[0]键。
5） 使先头位置进到1位置时，使用[UP]键，恢复时使用[DOWN]键。
位置 内容 8000H LB(逻辑板) 错误的次数 8001H TRV停止的次数 8002H SAF停止的次数 8003H ESS停止的次数 8004H DFC停止的次数 8005H SDP停止的次数 8006H SDP停止的次数 8007H OUS停止的次数 8008H 变成MTC的次数 8009H 变成CNS的次数 800AH 变成DZ的次数 800BH 变成IP的次数 800CH 援救次数(不到DZ时)
800DH 800EH 800FH 8010H 8011H 8012H ※※注意※※
援救次数（走过DZ时） 援救次数（DFC停止时） 援救次数 (ESS停止时) TPC停止次数 FST停止次数
行走中ZXT断开的次数
Page:9
※RAM的位置为 8000H~83FFH ※H表示满意16进制
※位置和次数的数字用16进制表示 AH→10 DH→13 BH→11 EH→14 CH→12 FH→15
关于新型IIB的状态表示方法
1983年秋以后出厂的IIB中装有表示状态的LED，由1983年8月1日以后的EPROM程序表示。
显示
示
状况 实验工具的显
TRV?
· · · 等待运行控制电源供应 等5秒后，便开始校正运行 等待呼梯信号 运行中 轿厢换速而未进DZ 轿厢换速进入DZ，但未完全停车 轿厢处于检修状态 急停开关被打开 轿厢处于救援操作 轿厢处于平层操作 马达热保护接点断路 轿厢处于地震操作 轿厢处于消防操作 轿厢因急停而处于减速，但未完全停止
CORR?
CALL? RUN DZ? ZXT? INS ESS RESCU RLV MTC EQO FOS
EMERG!
FAIL! PKS SAF? MIP？
· ·· ·
经过五次救援操作
大厅锁梯开关 安全回路断路
失去IP操作
因OUS动作而停止中
因SDP动作而停止中
OUS？ SDP？
※ 门完全闭着时,各显示灯点亮,门没有完全关闭时,显示灯一闪一灭.
—————————————————————— Mechanical Design 2 Mechanical Design The mechanical design of the Service Tool is shown in Flgure 2- 1. The Service Tool consists of two rows display with 16 columns each And a keyboard with 16 keys. The Tool is connected to the LCB_II over a RS 422 serial communication line. MCS-LCB_II 调试方法 MCS-LCB_II Service Tool Manual
LCB II – Menu System=1 Tools=2 7 8 M 7 7 4 5 F 7 7 1 2 S 7 7 GO 0 ON 7 7 Main Level Keys ———————————— M - MODULE F - FUNCTION S - SET Shift Keys - OFF - ON - UP - DOWN - DISP IN - SEL OUT - - DISP STATE - ENT CALL - TEST ENTER GO BACK Short Keys Hex Keys №. 9 0 1 7 2 3 6 7 4 5 6 3 7 7 8 9 clean -S4 -S5 -S6 -S7 -S8 -S9 - A - B - C - D - E - F 7 Shift key
4.2 LCB_II – Menus 4.2.1 Power On SELF TEST M - OK – MECS - MODE Figure 4 – 4 : Power On Display / Keys After Power On the Service Tool software runs an internal selftest. The display shown in figure 4 – 4 indicates a synchronized communication with the LCB_II and a successful selftest. The Service Tool is in operation now. M - Key MODULE: LCB_II – Menu Transition to the LCB_II – Menu. System=1 Tools=2 4.2.2 LCB_II - Menu M Key Sequence 1 LCB_II - Menu System=1 Tools=2 2 2 1 4 Figure 4 - 5 LCB_II – Menu / Keys Go Opr. Memory M on
1 1 2 Go on 2 Go on(UP) n (GO BACK) 1 (ON) M Key 1: transition to the SYSTEM – Menu Key2 : transition to the TOOLS – Menu LCB_II – Menu MCS120 Sol.V > shift Key UP :display the current
4.2.3 SYSTEM - Menu
1 Key Sequence SYSTEM – Menu > Status=1 Test=2 M
Figure 4 – 6 :SYSTEM – Menu / Keys
- Key 1: Transition to the STATUS – Menu 1 - Key 2: Transition to the TEST – Menu 2 - Key 3: Transition to the SETUP – Menu 3 - Key MODULE: back to LCB_II – Menu M (level M) clear - Key CLEAR: back to LCB_II – Menu
(one step back)
M - 1 2 3 Clear
4.2.4 STATUS – Menu
1
6
goon
goon
M
F clear
M – 1 – 1 - - - - - Key Sequence 1 5 goon STATUS – Menu > Call = 1 Input = 2 goon M F (go back) clear Key1 or Key2: Call of service Tool function Calls or input. Key3 or Key4: Call of service Tool function Output or Group. Key5: Call of service Tool function ICSS. Key6: Call of service Tool function Cmd. Key GOON / Shift Key GOBACK: Toggle through STATUS – Menu STATUS – Menu > notice: (?>?indicates Menu – Toggle) Output = 3 Group = 4 - Key MODULE: back to LCB_II Menu (level M) - Key FUNCTION: back to SYSTEM - Menu (level F) - Key CLEAR: back to SYSTEM - Menu (one step back)
4.2.5 TEST – Menu
Key Sequence TEST – Menu > Events= 1 Diag=2 Figure 4 – 8: SETUP – Menu / Keys M – 1 – 2 1 5 clear goon M F clear 1 5 goon goon M F clear - Key 1 or 2: Transition to the Events – or Diagnosis – Func. - Key 3 or 4: Transition to the Part – or RSL – Func. - Key 5: Call of Selftest. - Key GOON / Shift Key GOBACK: Toggle though SETUP - Menu TEST – Menu > Part = 3 RSL = 4 notice: (?>?indicates Menu – Toggle) - Key MODULE: back to LCB_II – Menu (level M) - Key FUNCTION: back to SYSTEM - Menu (level F) - Key CLEAR: back to SYSTEM - Menu (one step back)
M – 1 – 3
4.2.6 SETUP - Menu 1 Key Sequence 5 goon goon SETUP – Menu >
Install = 1 RSL = 2
(GOBACK) M F clear
Figure 4 – 9:SETUP – Menu / Keys
- Key 1 or 2: Transition to the INSTALL – Menu or RSL – Func. 1 - Key 3 or 4: Transition to the ALLOWED – Menu or Pos – Func. 6 - Key 5 or 6: Call of Service Tool Function DCS – Run or ELD – Func. - Key GOON / Shift Key GOBACK: goon Toggle through SETUP - Menu SETUP – Menu > goon Allowed = 3 POS = 4 Notice: (?>?indicates Menu – Toggle)
(GOBACK)
- Key MODULE: back to LCB_II - Menu M (level M)
- Key Function: back to System - Menu F (level F)
- Key CLEAR: back to System - Menu clear (one step back)
4.2.7 Install - Menu
M – 1 – 3 - 1 Key Sequence Install Menu > 01 System M Figure 4 – 10:Install – Menu / Keys 1 9 … clear goon goon F S clear 1 clear 9 … (ENTER) goon goon (GOBACK) M F S clear - Key … Key 9: Call of the Service Tool function INSTALL –SYSTEM … Install – Security.(Please call Install – Test with Key ENTER) - Shift Key ENTER: Call of the displayed Service Tool function. - Key GOON / Shift Key GOBACK: Toggle through INSTALL - Menu notice : (?>?indicates Menu – Toggle) - Key MODULE: back to LCB_II – Menu (level M) - Key FUNCTION: back to SYSTEM – Menu (level F) - Key SET: back to SETUP – Menu (level S) - Key CLEAR: back to SETUP – Menu (one step back)
M – 1 – 3 - 3 – Menu 4.2.8 ALLOWED 1 clear Key sequence 3
(ENTER) ALLOWED – Menu > 01 Enable goon goon
(GOBACK) M F S clear Figure 4 – 11: ALLOWED – Menu / Keys
1 - Key 1: Call of the Service Tool function Allowed - Enable clear … Key 3: …or the other 2 function of the ALLOWED - Menu 3 - Shift Key ENTER: Call of the display Service Tool function … (ENTER) - Key GOON / Shift Key GOBACK: goon Toggle through ALLOWED - Menu goon - Key MODULE: back to LCB_II – Menu (level M) M - Key FUNCTION: back to SYSTEM – Menu (level F) F - Key SET: back to SETUP _Menu (level S) S - Key CLEAR: back to SETUP_ Menu (one step back) clear
M-2 4.2.9 TOOLS – Menu Key sequence 1 clear 9 (ENTER) TOOLS – Menu > 1= Search IO goon goon
(GOBACK) M clear Figure 4 – 12:TOOLS – Menu / Keys
- Key 1: Call of Service Tool function Search IO. - Key 2,3 or 9: Call function Erase IO, SETUP INST or Opr. Memory 1 9 … clear - Shift Key ENTER: Calls the displayed Service Tool function. (ENTER) goon - Key GOON / Shift Key GOBACK: goon Toggle through TOOLS - Menu TOOLS – Menu > notice: (?>?indicates Menu – Toggle). 02 = Erase IO (GOBACK) - Key MODULE: back to LCB_II – Menu M (level M) - Key CLEAR: back to LCB_II – Menu clear (one step back)
4.3 Short Keys
S4 – S9 Short Keys
The Short Keys provide direct access to certain, often used Service
Tool functions, eliminating the need to step through the menu struc- ture. The Service Tool functions Input, Call, Install, Alter and Events are assigned to the Standard Short Keys S7 (Shift 7),S8 (Shift 8),S4 (Shift 4),S5 (Shift 5)and S6 (Shift 6). Short Key S9 (Shift 9) is a free programmable key to store any posi tion of the Tree – Structure as a sixth Short Key. Once you have stored S9 (by pressing S9at the desired position)you Can reset it only on level M (LCB_II – Menu)
LCB_II Menu System = 1 Tools = 2 7 DISP STATE 8 ENT CALL 9 TEST M 7 8 9 4 DISPIN 5 SELout 6 F 4 5 6 S 1 2 3 1 S4 = Install S5 = RSL S6 = Event 2 S7 = Input S8 = Calls S9 = PROG 3 0 Goon clear
Figure 4 – 13 : Short Keys S4 – S9. LCB_II - Menu 4.3.1 Standard Short Keys SYSTEM - Menu TOOL - Menu Search IO TEST - Menu SETUP - Menu STATES - Menu Erase IO S8 Calls S6 Events S4 Install Setup INST Inputs Diagnosis RSL S7 S5 Opr.Memory Figure 4 – 14: Standard Short Keys S4, S5, S7, S8 and S9. Example: A – 00 IDL ST ] [ ] [ ------------------------------------ u d l ux ------------------------------------ The current function may be STATUS / Output - Short Key S8: Direct call of function STATUS / Calls. 8 (see chapter: 5.1.2) (S8) A – 00 IDL ST ] [ ] [ ----------------------------------------- u d l ux -----------------------------------------
PROG S9 LCB_II - Menu Short Key 4.3.2 Programmable Short Key S9 STATES - Menu S6 Calls Inputs 9 Outputs SYSTEM - Menu TOOL - Menu Search IO TEST - Menu SETUP - Menu Erase IO S8 Events Diagnosis S4 5 Install Setup INST S7 S5 RSL Opr.Memory Allowed Part Figure 4 – 15: Standard Short Keys and Short Key S9
In Figure 4 – 15 you can see the function of Short Key S9. In this example the function STATUS / Outputs is set to the Short Key S9 function. Now S9 is acting like a Standard Short Key.
In Figure 4 – 15 the current position is SETUP / RSL. Now you can call function STATUS / Output with Short Key S9.
A – 00 IDL ST ] [ ] [ Example
----------------------------------------- u d l ux ----------------------------------------- 9 - Function STATUS / Output (see chapter: 5.1.4) Should be set as a Short Key function: First you have to call STATUS / Output. Short Key S9: Position STATUS / Output is set to the Short Key S9 function (S9) 1 M (ON) 9 (S9) - Key MODULE and Shift Key ON: The status of Store Key S9 is dis- played on the LCB_II – Menu. notice : - Short Key S9 and LCB_II – Menu: Reset of Short Key S9. LCB_II - Menu SVT – Key PROG : on LCB_II – Menu SVT – Key – PROG : off IO I AD P AD P >0000_ _ _ _ _ _ _ _ _ _ _ Now you can toggle between any function (SETUP / RSL (see chapter: 5.2.2)) and STATUS / Output.
9 (S9) - Short Key S9: Call of function STATUS / Output. A – 00 IDL ST ] [ ] [ u d l ux_ _ _
5 ——————————————————————
Service Tool Functions
5 Service Tool Functions
STATUS – Menu > Call = 1 Input = 2 STATUS – Functions LCB_II – Menu System = 1 Tools = 2 All the Service Tool functions are divided into 4 groups, the STATUS, TEST, and SETUP and Tools functions. SYSTEM – Menu > Status = 1 Test = 2 TOOLS – Menu > 1 = Search IO TEST – Menu > Events = 1 Diag = 2 SETUP – Menu > Install = 1 RSL = 2 TEST – Functions SETUP – Functions TOOLS - Functions
Figure 5 – 1: STATUS-, SETUP-, and TOOLS- paths STATUS – Menu > Call = 1 Input = 2 5.1 STATUS – Functions ************* STATUS – Menu > Key Sequence Output = 3 Group = 4 STATUS – Menu > ICSS = 5 CMD = 6 clear 1 6 2 3 4 5 A-00 IDL ST ] [ ] [ C> U00D00 A 1C Calls – function A-00 IDL ST ] [ ] [ A-00 IDL ST ] [ ] [ A–00 IDL ST ] [ ] [ u d l ux **************** INS ?? dw DFC Input – Function Output – Function Group – Function M – 1 – 1 goon A-00 IDL ST ] [ ][ ?:CLD1 ?:CLD2 CMD – Func. ICSS IS ONLINE ICSS2 IS OFFLINE ICSS – Func. Figure 5 – 2 : STATUS – Functions In the following all the STATUS – functions are explained. There are the Calls,Input,Output,Group,ICSS and CMD func- A – 00 IDL ST ] [ ] [ tions to control the elevator calls and monitor the software status and system I/O ?s. The first row always displays the Software Status. It gives information about - the car identifier in group C> U00D00 A 1 C - the direction of the moving cabin. ------------------------------ - the current position. - the Operational Control software State, and - the Front and Rear Door State.
Please find in chapter 5.1.1 the exact description of
M – 1 – 2 – 4 5.2.4 RSL – Test - Function
ADR = _ _ _ _ _ _ _ _ _ _
Key Sequence
The RSL – Test – Function can be used to test the remote Stations.
After the address of the Remote Station is entered, - the four Input Pins are monitored and - the four Output pins can be set.
Figure 5-13 : RSL / Test - Function Enter the RSL – address 1 - Key 1,5: Input Keys of the 2 RSL - address ADR=15______________ _____________________- - Key CLEAR: deletes the last input if you want to correct clear the number. clear - Shift Key ENTER: termination of the input operation The current status of the Input – and Output pins of The entered RSL address is ADR=15 BIT = 1 displayed. IN : off OUT : off
Change address, pin and output
goon goon 2 3 1 0 clear - Key GOON / Shift Key GOBACK: Skip to the next / Previous address. - Shift Key UP / Shift Key DOWN: Skip to the next / Previous bit. - Shift Key ON / Shift Key OFF: Toggle of the Output - Pin: on / off - Key CLEAR: back to Test - Menu ADR = 16 BIT = 1 IN : off OUT : off ADR = 16 BIT = 2 IN : off OUT : off ADR = 16 BIT = 2 IN : off OUT : on
ADR = 16 BIT = 2 IN : off OUT : on 1) 2)
RSL: Status RSL address(decimal) RSL - pin RSL Input Pin Status (Monitor)
1) ADR 2) BIT
3) IN
3) 4)
(on = action / off = not active)
4) OUT RSL Output Pin Status
5.2.5 Selfest - Function
PR ? EE ? RA ? RS ?_ _ _ _ _ _ Key Sequence
Function Selftest can be used
- to test the memory of the LCB_II board and - to check the Remote Serial Link. The test will start as soon as the Selftest - Function Is called.
Figure 5-14: Selftest - Function PR + EE - RA ? RS ?_ _ _ _ _ The flashing question mark indicates which part of the test is currently active (RA): - PR EPROM - test - EE EEPROM - test - RA RAM-test - RS Remote Serial Link test The single results are displayed as: - (+)for Test successfully finished - ( -)for Test not successfully finished
Please notice that for the EE – test a checksum written into the EEPROM is verified .So, the first call of the test with a new EEPROM will result a (-) PR + EE + RA + RS 16aR0000 The RS – test will give some information about single Remote Station. - if they are setup but not available - if they are responding - if they are parity errors RS – Remote Station Test
M – 1 – 2 – 5
PR + EE + RA + RS 16aR0000 goon goon 16 A B R r RS - test RSL - address available (IO-No. is defined) not available responding (Hardware is okay) clear not responding 000 parity error counter - Key GOON / Shift Key GOBACK : Skip through the list of Remote Station which signals - not available or - not responding or - parity errors. PR + EE + RA + RS 48Ar000 __ - If there was at least one entry in the list ,the display for Test not successfully PR + EE + RA + finished ( - ) occurs. RS -_ _ _ _ _ _ - Key CLEAR: back to Test - Menu
M – 1 – 3
5.3 SETUP - FUNCTION SETUP – Menu > Key Sequence goon Install=1 RSL=2 SETUP – Menu > Allowed=3 POS=4 clear SETUP – Menu > 1 6 Install – Menu > 01 System 000 System new to Floor : Display 2 3 4 5 press ENTER TOP =004> ELD - Function Install – Function ALLOWED – Menu > 01 Enable SETUP OLD NEW PCS L 00 = 010 > 000 at CUDE CUDE P R to start DCS 00 1100 0000 0 0 press ENTER SETUP – Menu > POS - Function Allowed – Function DCS - Function RSL - Function
Figure 5-15 : SETUP - Functions
In the following all the SETUP – function are explained. The Install , RSL , Allowed , POS and ELD functions are used to set the parameters and masks of the EEPROM whereas the DCS Run function has the task to check if every open door opens the safety chain.
There are four different groups of Setup Parameters to define the elevator environ-
Ment:
- Installation Patameter
- RSL – IO Numbers - Allowed Masks - Position Indicator Parameter - ELD - Display
百度搜索“yundocx”或“云文档网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，云文档网，提供经典综合文库OTIS服务器使用说明在线全文阅读。
最新更新：
